19.05.2021
Key safety precautions
When operating the equipment, it is strictly forbidden to touch the cutting elements. This can lead to injury, as they are very sharp and move at high speed. Before using the plotter, make sure that it is securely grounded. Otherwise, there is a risk of electric shock.
Plotters for cutting patterns are quite complex modern devices. For this reason, only qualified specialists are required to repair and maintain them. Be sure to disconnect the equipment from the power supply as soon as you notice obvious signs of a malfunction, such as a strong overheating of the housing, smoke coming from it, an unpleasant smell, etc.
Connect the plotter only to the power supply network, which has the parameters recommended by the manufacturer. Otherwise, the equipment may fail. Do not allow large amounts of dust to accumulate on the surface of the device. This may cause the equipment to overheat and the electric motor to burn out. Remove dust and other dirt regularly, using a dry cloth or a jet of compressed air.
Do not allow moisture to enter the equipment housing. If you need to disconnect the plotter, do not pull the power cord, but hold on to the plug itself, pulling it out of the socket. Cutting knives must be regularly lubricated and cleaned. If you decide to replace them, you can not touch them with unprotected hands. It is necessary to wear thick gloves. It is strictly forbidden to operate the equipment in heavily dusty rooms.
Our company offers a wide range of patterns for bumper cars. You can also order films for pasting from trusted manufacturers.
When operating the equipment, it is strictly forbidden to touch the cutting elements. This can lead to injury, as they are very sharp and move at high speed. Before using the plotter, make sure that it is securely grounded. Otherwise, there is a risk of electric shock.
Plotters for cutting patterns are quite complex modern devices. For this reason, only qualified specialists are required to repair and maintain them. Be sure to disconnect the equipment from the power supply as soon as you notice obvious signs of a malfunction, such as a strong overheating of the housing, smoke coming from it, an unpleasant smell, etc.
Connect the plotter only to the power supply network, which has the parameters recommended by the manufacturer. Otherwise, the equipment may fail. Do not allow large amounts of dust to accumulate on the surface of the device. This may cause the equipment to overheat and the electric motor to burn out. Remove dust and other dirt regularly, using a dry cloth or a jet of compressed air.
Do not allow moisture to enter the equipment housing. If you need to disconnect the plotter, do not pull the power cord, but hold on to the plug itself, pulling it out of the socket. Cutting knives must be regularly lubricated and cleaned. If you decide to replace them, you can not touch them with unprotected hands. It is necessary to wear thick gloves. It is strictly forbidden to operate the equipment in heavily dusty rooms.
Our company offers a wide range of patterns for bumper cars. You can also order films for pasting from trusted manufacturers.