27.06.2021
In the cabin, the reflective ability of such materials is inappropriate due to the high risk of glare formation, which can blind the driver, provoking an accident.
Other types of film that are not suitable for the interior
If you want to paste a transparent shockproof film over the glass of devices or the monitor of a standard head unit, you should abandon the material, the upper layer of which does not have self-healing properties. Otherwise, scuffs and scratches on the film can distort or obscure the observed indicators, which negatively affects the safety of driving.
Having found patterns for the car body, drivers often decide to paste over the car with a hydrophobic film, the surface of which contributes to the rapid draining of water. Slippery material should not be used in the interior when pasting the steering wheel and other parts that the driver and passengers may touch with wet hands.
The film with a 3D effect can not be pasted over the interior parts that are in the driver's field of view when viewing the roadway. The material that creates optical illusions makes it difficult to focus attention on the road and creates an increased load on vision, provoking rapid fatigue of the driver.
When choosing a film for pasting the interior, it is recommended to sniff the product. A film with a sharp smell for pasting the interior of the car can not be used because of the risk of deterioration of the health of the driver and passengers during prolonged stay in an unventilated cabin.
If you regularly use polishing sprays and alcohol cleaners when caring for the interior of the car, you should refrain from pasting the interior with a polyvinyl chloride film. Such a material becomes porous upon contact with aggressive reagents, releasing toxic volatile compounds into the air and actively absorbing harmful substances contained in auto chemicals. In this case, you should make a choice in favor of a polyurethane film, which has much better chemical resistance.
Other types of film that are not suitable for the interior
If you want to paste a transparent shockproof film over the glass of devices or the monitor of a standard head unit, you should abandon the material, the upper layer of which does not have self-healing properties. Otherwise, scuffs and scratches on the film can distort or obscure the observed indicators, which negatively affects the safety of driving.
Having found patterns for the car body, drivers often decide to paste over the car with a hydrophobic film, the surface of which contributes to the rapid draining of water. Slippery material should not be used in the interior when pasting the steering wheel and other parts that the driver and passengers may touch with wet hands.
The film with a 3D effect can not be pasted over the interior parts that are in the driver's field of view when viewing the roadway. The material that creates optical illusions makes it difficult to focus attention on the road and creates an increased load on vision, provoking rapid fatigue of the driver.
When choosing a film for pasting the interior, it is recommended to sniff the product. A film with a sharp smell for pasting the interior of the car can not be used because of the risk of deterioration of the health of the driver and passengers during prolonged stay in an unventilated cabin.
If you regularly use polishing sprays and alcohol cleaners when caring for the interior of the car, you should refrain from pasting the interior with a polyvinyl chloride film. Such a material becomes porous upon contact with aggressive reagents, releasing toxic volatile compounds into the air and actively absorbing harmful substances contained in auto chemicals. In this case, you should make a choice in favor of a polyurethane film, which has much better chemical resistance.