04.11.2021
Accordingly, plastic surfaces also need protection from mechanical damage. The most reliable way to preserve the integrity of the headlights is to use an anti-gravity polyurethane film. It is easy to operate, but application requires additional devices and tools, such as patterns for the car body, plotter for cutting material, solutions for cleaning surfaces, etc.
Advantages and technology of working with anti-gravity film
You can protect the headlights not only with a film, but also by other means - varnishing or special overlays. Experienced car owners claim that they have several significant drawbacks. The varnish is easy to use, but it can begin to peel off after a few weeks, especially if the application rules are violated. The pads require constant cleaning, as dirt accumulates under them, and spoil the appearance of the machine.
Anti-gravity polyurethane films are transparent, so they are completely invisible on the surface of the headlights. They do not turn yellow, do not lag behind and reliably protect parts of the car from damage – the manufacturer's warranty is several years. The disadvantages include the high cost and rather complex application technology.
Pasting the surface of the car with an anti-gravity film must be done in a clean, well-lit box at a temperature of at least 16 degrees. The material is pre-cut on the plotter using electronic patterns. Before processing, the headlights and other surfaces require preparation – they are cleaned of dirt and degreased. You should work as carefully as possible so as not to damage the coating. Next, the film is applied to the surface and smoothed so that there are no air bubbles or moisture left under it, and left for a day for good fixation.
You can purchase from us patterns for the car body, headlights, interior.
Advantages and technology of working with anti-gravity film
You can protect the headlights not only with a film, but also by other means - varnishing or special overlays. Experienced car owners claim that they have several significant drawbacks. The varnish is easy to use, but it can begin to peel off after a few weeks, especially if the application rules are violated. The pads require constant cleaning, as dirt accumulates under them, and spoil the appearance of the machine.
Anti-gravity polyurethane films are transparent, so they are completely invisible on the surface of the headlights. They do not turn yellow, do not lag behind and reliably protect parts of the car from damage – the manufacturer's warranty is several years. The disadvantages include the high cost and rather complex application technology.
Pasting the surface of the car with an anti-gravity film must be done in a clean, well-lit box at a temperature of at least 16 degrees. The material is pre-cut on the plotter using electronic patterns. Before processing, the headlights and other surfaces require preparation – they are cleaned of dirt and degreased. You should work as carefully as possible so as not to damage the coating. Next, the film is applied to the surface and smoothed so that there are no air bubbles or moisture left under it, and left for a day for good fixation.
You can purchase from us patterns for the car body, headlights, interior.